1lb – 6″ Stainless Steel 304 Hemispheric Dewaxing Closed Loop Extractor AND Recovery Tank With Vapor, Liquid and Stainless Compound Gauge. Splatter Platter, Hose, and Extra set of Gaskets. Pressure / Vacuum Tested Items included: – Full 6″ Hemispheric Closed Loop extractor (6″x14″) with a High Pressure Clamped Splatter Platter(6″x2″) SS 304 (Sealed,Pressure Tested @ 100psi for 48hrs. and Vacuum Tested @ -29.9inhg for 48hrs). Based On the tank being 6″x16″ essentially you can run 7.50lbs of solvant in this extractor. Easily enough for 2lbs if you want to expand! – 6″x12″ Recovery Tank with Liquid port, Vapor Port and Built in Stainless Coumpound Gauge. The gas tank is 6″x12″ which is capable of holding 6lbs of solvent at an 80% Fill. – Dual 1″ Built in and Welded Sight Glass. Thickest option available. This makes recovery a million times easier. Literally you can see when all the solvent is gone. You can see the purge happening. – Stainless Compound Gauge (Vacuum/Pressure) on the extractor and recovery tank- 3″ shower head top cap for even distribution of solvent over you material. Really helps with «channeling» – 3″x24″ Dewaxing stainless steel spool for material of choice.- 3″ Inline Filter with Removable 100 mesh screen and Clip. – 72″ PTFE Lined High Pressure Stainless Steel Hose with 1/4inch JIC 37 Degree Connections Rated for 6000psi- High Pressure Tri-clamps for every single clamp. – Viton Tri-clamp Gaskets throughout the system – 3 extra 6″ gaskets, 2x- 3″ 100 mesh screen gaskets,2x- 1.5″ 100 mesh screen gaskets and 1 extra 3″ non-screened gasket are included extra. You will have an extra set for every single gasket. – All WOG(Water,Oil,Gas) Stainless Steel Ball Valves included rated at 1000 psi. Including the 3 Piece 1.5″ Ball Valve. – 100 mesh 316L Stainless Steel Tri clamp gaskets are the right mesh for this application.
QSP Stainless Sintered Mesh Filter Plate Version 2.0 CRC Closed Loop Extractor
These Stainless Steel Sintered Filter Plates bolt directly to Tri-Clamp Spools and allow the user to pressurize the system to force a faster filtration rate than what has been previously been able to be achieved.
Tri Clamp Filter Plate and Clip Set SS304 Stainless Steel Closed Loop Extractor
Note: Does not include Clamp or Gasket. Stainless Steel Tri-Clamp Filter Plate. Material 304 Stainless Steel.
2-2.5lb 10″ Stainless Steel 304 Hemispheric Dewaxing Closed Loop Extractor
2-2.5lb 10″ Stainless Steel 304 Hemispheric Dewaxing Closed Loop Extractor AND Recovery Tank, Splatter Platter, 3x Hoses, Molecular Sieve and Extra set of Gaskets. Pressure / Vacuum Tested Nitro Assist Ready Items included: – Full 10″ Hemispheric Closed Loop extractor (10″x12″) with a High Pressure Clamped Splatter Platter(10″x2″) SS 304 Sealed,Pressure Tested @ 100psi for 48hrs. and Vacuum Tested @ -29.9inhg for 48hrs) – Includes Stainless Compound Gauge and PRV set to 120psi in every position on the extractor(material column and collection)- 12″x12″ Recovery Solvent Tank with Liquid port, 2x Vapor Port and Built in Stainless Compound Gauge and PRV set to 120psi- Dual 2″ Built in and Welded Sight Glass on both collection and solvent tank. Thickest option available. This makes recovery a million times easier. Literally you can see when all the solvent is gone. You can see the purge happening. – Stainless Compound Gauge (Vacuum/Pressure) on the extractor, material column and recovery tank- 120 PSI PRV on the extractor, material column and recovery tank- 4″ shower head top cap for even distribution of solvent over you material. Really helps with «channeling» – 4″x24″ Dewaxing stainless steel spool for material of choice. – 4″ Inline Filter with Removable 100 mesh screen and Clip. – 2x 96″ and 1x 72″ PTFE Lined High Pressure Stainless Steel Hose with 1/4inch JIC 37 Degree Connections Rated for 6000psi- High Pressure Tri-clamps for every single clamp. – Viton Tri-clamp Gaskets throughout the system – 3 extra 10″ gaskets, 3x- 4″ 100 mesh screen gaskets,1x- 1.5″ 100 mesh screen gaskets are included extra. You will have an extra set for every single gasket. – 100 mesh 316L Stainless Steel Tri clamp gaskets are the right mesh for this application.
1lb 6″ SS 304 Dewaxing Closed Loop Extractor with Splatter Platter, Hose, Gauge
1lb – 6″ Stainless Steel 304 Dewaxing Closed Loop Extractor with Splatter Platter, Hose, Removeable Stainless Compound Gauge and Extra set of Gaskets. Pressure / Vacuum Tested Items included: – Full Closed Loop extractor (6″x12″) with a High Pressure Clamped Splatter Platter(6″x2″) SS 304 (Sealed,Pressure Tested @ 100psi for 48hrs. and Vacuum Tested @ -29.9inhg for 48hrs). Based On the tank being 6×14 essentially you can run 6.75lbs of solvant in this extractor. Easily enough for 2lbs if you want to expand! – Built in and Welded Sight Glass. Thickest option available. This makes recovery a million times easier. Literally you can see when all the solvent is gone. You can see the purge happening. – Removable Stainless Coupound Gauge (Vacuum/Pressure) with 1/4″ Female JIC just like the hose. The real side you need a gauge on is the solvent tank. If you have pressure during your extraction your doing something wrong. But this way you can put it on literally any port on the extractor. You now have a gauge for both side of your extractor when you need it. – 3″ shower head top cap for even distribution of solvent over you material. Really helps with «channeling» – 3″x24″ Dewaxing stainless steel spool for material of choice. – 3″ Inline Filter with Removable 100 mesh screen and Clip. – 72″ PTFE Lined High Pressure Stainless Steel Hose with 1/4inch JIC 37 Degree Connections Rated for 6000psi- High Pressure Tri-clamps for every single clamp. – Viton Tri-clamp Gaskets throughout the system – 2 extra 6″ gaskets, 3″ 100 mesh screen gaskets, 1.5″ 100 mesh screen gaskets and 1 extra 3″ non-screened gasket are included extra. You will have an extra set for every single gasket. – All WOG(Water,Oil,Gas) Stainless Steel Ball Valves included rated at 1000 psi. Including the 3 Piece 1.5″ Ball Valve. – 100 mesh 316L Stainless Steel Tri clamp gaskets are the right mesh for this application.
Tri Clamp Filter Plate and Ring Set SS304 Stainless Steel Closed Loop Extractor
Stainless Steel Tri-Clamp Filter Plate Stainless steel filter plates offer the user a great solid platform to help with filtration during the extraction process and come solid ring. These filter plates can be used simultaneously with ashless filter papers or any other filtration media like stainless steel ball bearings or steel wool to increase surface and filtration level to remove fats, lipids, waxes and any other unwanted material during the extraction process. **Note: Does not include Clamp or Gasket. Specifications: Material 304 Stainless Steel Standard 3A Mirror Polish Connection Type(s) Tri-Clamp Hole Diameter 5.8mm Height 2″
In-line Stainless Filter pod for sock Closed Loop Extractor, usa filter sock
With 1.5” tri clamp fittings top and bottom1x 4” high pressure clamp1x 4” viton gasket 1x top cap with 1.5” tri clamp Ships from Sebastopol CA 95472 these are 4” round and take the 8” length bags,1um, 5um and 10um are stocked at all locations Filtration pod, can be used with crc filtration, in-line for hydrocarbon and ethanol extraction. Closed loop extractor, crc, ethanol, butane, propane,
